You can download BMW INPA 5.0.2 (last version, includes NCSExpert and WinKFP) software here: (this set is fully tested by me). Unpack INPA and run Programminstallation/setup.exe Choose language: Click “Next”: Next step: Next step: Next step: Next step: Next step: Next step: Next step: Next step: Next step: Next step (select STD:OBD even if you have DCAN cable): Next step (select COM port that your cable plugged in): Next step: Next step (click 'skip' 3 times): Next step: Next step (restart your computer). Tyler, thanks for the quick reply. I've read other places that you must select the USB to Serial Converter option if you have a USB OBD II cable. Sd gundam g generation seed. Could you please expand on the topic?

1. Ncs Expert 4.0.1 Download

Also, I installed the recommended software but it does not have e39 on any of the tabs for INPA. How do I enable the e39? Also, I am having issues locating OBD.ini in my al of my installs. I downloaded this file separately, configured it, and added to C:/Windows. Any idea why I couldn't find this file in Ediabas/ Bin originally? Thanks in advance.

NCS/INPA Download: Access to the direct download of NCS-Expert, INPA 6.4.3, INPA 5.02 and bonus coding files can be found here. Full.PDF Installation.

I have been trying to find clear instructions on how to achieve this installation successfully over the past few months, I kept giving up due to confusion, frustration, misleading threads and bad information. However, after much research, I have finally got it working and hope to help others searching for solutions. I can't guarantee that this is absolutely perfectly described but the process below worked in my case, hopefully it'll get you up and running too. My specific use is to diagnose codes on my E46 M3 (2004) and so I can confirm that it works fully with this car. If someone wishes to take screenshots, I'll add them to the guide. Assumptions and Clarifications • This setup/installation DOES work on Windows 7 64bit.

• This setup/installation DOES NOT require VM/Virtual Machine images. • This setup/installation DOES work on an E46 (my car).

• This setup/installation DOES give you INPA and EDIABAS 6.4.7 and 5.0.2. • This setup/installation DOES NOT give you NCS Expert or anything other than above mentioned. • This guide assumes that you have a basic knowledge of Windows, Control Panel and Device Manager. Buy a cable I purchased a USB cable from EBay, it came with software but I didn't use it and instead used online resources that I downloaded for which I'll provide links. The cable I purchased is a USB to OBD2 connector that plugs into your BMW to the right hand side of the steering wheel, in the foot-well area.

Ncs Expert 4.0.1 Download

Free download hdloader 0.8 boot.elf. This is the specific cable that I purchased and that I can confirm works: 2. Download the software There are many sources on the internet for INPA/EDIABAS, some seem to work, others do not - I used these specific downloads and they worked perfectly: ** UNFORTUNATELY THE DOWNLOAD LINKS ARE NO LONGER AVAILABLE - BUT I WILL SEE WHAT I CAN DO ** If for any reason the above links are missing/broken, PM me and I'll see what I can do. Thank you to whomever is hosting the above files and I hope that you do not mind me providing these links. Setup/Configure your OBD2 USB Cable • Put the DVD that arrived with the cable into the DVD drive on your PC. • Plug in the cable into a USB port on your computer, you must ONLY use this USB port from here-on for this cable. If your computer is connected to the internet it should automatically search and install in the USB cable drivers.

If your computer does NOT automatically detect the cable, you may need to use 'Device Manager' to manually update/select the driver. • Once installed, go to Control Panel -> System -> Then click on the Hardware tab, then click on Device Manager. • Locate the entry 'USB Serial Port' in the 'Ports' section of Device Manager. It should read ‘USB Serial Port (COMX)'. • Right-click on the above and select ‘Properties’, then click on the ‘Port Settings’ Tab and then click on ‘Advanced’. • Change the 'Com Port Number' entry to 'COM1'. • Change the 'Latency Timer (msec)' to '1'.